1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 170Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 170

1251 12Using tool as drawn on Page 4-9, or equivalent, push the taper pin toward the intake manifold surfaceDo not use any
and keep the needles of each cylinder togetherr:=lN Loosely install cylinder head to prevent pistons from falling 1291 16Remove
the rod cap screws using OMC Torque Socket, PIN 331638Remove the cap's needle bearings and cages1301 17Lift the crankshaft
out of the cylinder blockReplace the rod caps on the rodsOrient them exactly as they were before you removed themInstall
the screws finger tight E.J Remove the cylinder head and gently push up on the connecting rods to remove No.1 and No.2 piston
assembliesProtect the condition of the piston by packing paper towels between the connecting rod and pistonDo not allow the