1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 171Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 171

32 19Remove the upper crankshaft seal and bearing Discard the seal and clean and inspect the bearing33 20Remove O-ring from
piston ring expandersDO NOT try to save the ringsInstall complete set of new rings on every powerhead service job1361 24Using
tool as drawn on Page 4-8, or OMCRetaining Ring Pliers, PIN 325937, remove the wrist pin retaining ringsDiscard the rings13711381
25The fit between the wrist pin to bosses of the piston is loose on both sidesPush the wrist pin through to free the piston
from the connecting rodIf necessary, use OMC Piston Cradle, PIN 326573, and OMC Wrist Pin Pressing Pin, PIN 326356With the
piston skirt flush with the cradle, press out the wrist pin using an arbor pressBe careful not to lose any of the 28 needle