1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 182Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 182

Installation rv head withcoat new a-ring and greasebore of the crankcase 1Lightly outside the OMC Triple-Guard Install -ring
screws to torque of 192-216 inIbs(22-24 Nm)6Apply OMC Nut Lock to the threads of the port and starboard exhaust housing studsPlace
the washer on the studsInstall and tighten the two powerhead retaining nuts7Install the ground lead to the powerheadApply
OMC Black Neoprene Dip to ground screw connections8Install the carburetor, ignition, and electrical components to the powerhead
ill and ignition wiring is routed and clamped in its original position1sl 9R and TE ModelsInstall the neutral start plunger
and spring through the component bracketUsing pinsecure the plunger as shown To prevent possible fire or explosion, make
sure all electrical 10After checking the ignition plate routing, install the component bracket, neutral start plunger, lockout