1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 184Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 184

Shift Lever Adjustment, 20 thru 30 1Rotate the propeller shaft and move the shift lever to NEUTRAL 5J 2Loosen both shift
116 in(1,6 mm): Loosen the two neutral start switch screws Insert V16 in(1,6 mm) drill bit between the bottom of the switch
and the top of the plunger Move the switch until the switch and plunger contact the drill bit Tighten the switch screws securely
test for proper operation of the neutral start switch, connect continuity light or an ohmmeter (set to low ohms scale) between
the neutral start switch yellowred lead terminal and ground With the motor in NEUTRAL, the light or ohmmeter should show
continuity While rotating the propeller shaft, shift the motor into FORWARD, then REVERSEThe light or ohmmeter should not
show continuity in either FORWARD or REVERSE 5If adjustment is necessary, rotate the propeller shaft and shift motor into