1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 200Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 200

Installation 1Insert the stop button wires and throttle cable through the lower motor cover grommetUse isopropyl alcohol
Insert Tool, PIN 322697, to install the stop button black wire into the 5-pin Amphenol plug 181 6Connect the Amphenol connectorSecure
the connector to the ignition coil post with tie strap 191 7Thread the throttle cable anchor onto the cable housing until
anchor is flush with end of threads 8Thread the cable end connector on the cable until seated rv Insert pin throttle cable
connector into throttle lever and Positi.on the rv withPosition throttle cablewasher powerhead and secure 10anchor on shoulder