1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 203Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 203

10 '8l 8Using punch and mallet, drive the steel pin that retains the inner handle from the steering handle INotel Do not
if necessary2Inspect the steering handle components for wear, cracks, or damageReplace parts if necessary3Refer to Ignition
System, Section 3, to test stop switch Assembly 1Install the throttle cable seal in inner handler,Ql 2If removed, apply Loctite
Depend 300 adhesive to inner handle at areas shown'111 3Install the metal outer handle over the plastic inner handle and
drive the outer handle into place4Secure tab of the inner handle into recess of the outer handle with the steel pin I12l