1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 204Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 204

14 6Install the throttle control plate on outer handlef151 7Place the throttle end cap into inner handleThe tab on the cap
halves on the handle and slide the grip over the helixBe sure the twist-grip's speed indicator line is positioned with the
speed range symbol on the handleSnap the grip into place f181 11Turn the idle speed adjustment knob counterclockwise to the
minimum slow speed position f191 2012Slide the protective sleeve over the stop switch leads and throttle cableSlide grommet
over the protective sleeve until 12 in(12 mm) of the sleeve is exposedPlace grommet in position and install stop switch bracket