1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 206Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 206

Installation 1Insert the stop button leads and the throttle cable through the lower engine cover grommet2Apply OMC Tripe-Guard
Nm)fJ1 6Using OMC Insert Tool, PI 322697, install the stop button lead into the plugConnect the 1-pin Ampheno connectorSecure
connector with wire retainer 101 7Thread the connector onto the cable housing 1314 inmm) from end of the cable sleeveSecure
connector in place with nut8Thread the bracket onto the cable until seated24193 r:;] 9Position the connector on the throttle
armSecure the connector to the throttle arm using two washers and cotter pin rv der Secureand spacerto the lower engine cover