1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 208Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 208

13Remove the lower thrust mount and shift rod grommet 14Refer to Cleaning and Inspection at the beginning of this sectionAssembly
O-rings and torque screws to 60-84 inIbs(7-9 Nm)r,Q1 5Place the lateral mounts in the lower mount bracketsOMC Nut Lock to
threads of lower mount bracket screwsInstall the lower mount bracketsTighten screws to torque of 60-84 in Ibs(7-9 Nm)6Position
new idle relief muffler gasketInstall the muffler the exhaust housingApply OMC Nut Lockto the muffler's reta ining screw
threadsTighten the screws to torque of 48-60 inIbs(5-7 Nm) Position the lower engine cover support on the exhaust housing
and torque the five screws to 60-84 inIbs(7-9 Nm) f21 8Lubricate the upper shift rod with OMC Triple-Guard greaseInstall
the shift rod into the shift arm with pin and new cotter pin9Install the powerhead as described in Section 4 [!] 10Place