1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 209Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 209

Midsection Adjustments9.915 Tilt Friction Adjustment (Tiller Handle Models) Use 916 inwrench to tighten the tilt shaft nut
the knob clockwise increases idle speed, turning it counterclockwise decreases idle speedMake certain that throttle is in
SLOW position and the motor is at normal operating temperature before making the idle speed adjustmentMotor should idle at
recommended RPM in gearThrottle Friction Adjustment Idle Speed Adjustment Some models are equipped with throttle friction
adjustment knob located on the steering handleTighten the knob to reduce the effort required to hold throttle settingTurn
the knob: clockwise to increase friction counterclockwise to decrease friction fA Tighten knob only enough to hold throttle