1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 210Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 210

Exhaust Housing Service Removal and Disassembly 20 thru 30 1Remove the powerhead as described in Section 42Remove the gearcase
the four screws holding the lower engine cover to the exhaust housingLift the cover off the exhaust housingIfthe washers
on the exhaust housing are loose, remove them at this timef5l1sl6Bend locking tab on the clip and remove the screw and the
clip retaining the shift lever to the bellcrankRemove the shift shaft retainer with small screwdriverHold the shift rod lever
and the upper shift rod while removing the adjustment lever and shaftrJl7Remove two lower mount to exhaust housing screws