1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 212Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 212

the lower front mount and the exhaust housingPosition the port and starboard lower mount housingsClean the threads of the
shaft retainer Q) into placePlace new shift rod lever clip over the shift rod leverInstall and tighten the screw to torque
of 60-84 inIbs(7-9 Nm).Bend the locking tab of the clip against the head of the screwr:;;l 8If removed, apply OMC Adhesive
to the four washers and place the washers as shown in figure Place the lower engine cover on the exhaust housingInstall and
tighten the screws to torque of 72-96 inIbs(8-11 Nm) 1161 9Slide the actuator cam through the lower engine cover Place the
bottom of the cam over the grease fitting of the adjustment lever and shaftPosition the actuator cam grommet in place in
the lower engine coverr:J7l 10Remote ModelsSecure the shift lever to the adjustment lever and shaft with two screws and lock