1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 216Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 216

Assembly Lubricate the tilt tube and tiller handle components with OMC Triple-Guard greaser;l [:;1 1If any of the swivel
mating flange of the pilot shaftAssemble the pilot shaft to the steering bracket and tighten the screws to torque of 120-144
inIbs(14-16 Nm)nut and washerTighten the nut to torque of 144-168 in.lbs f51 3Install the upper front mount to the steering
bracket with f411sl 4Assemble the friction block and liner as shown in figure 4Lubricate and place the liner and friction