1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 225Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 225

Water Pump Servicing20, 25, 30 Disassembly 1Remove gearcase assembly as described in Gearcase Servicing, this Section[]]
into the impeller housing rn 2Apply OMC Tripe-Guard thick shifttorod a-ring Place grease the two impeller housing a-ringsInstall
the small, the large O-ring into the impeller housing[]] 3Lightly coat the exterior of the impeller cup with OMC Gasket Sealing
CompoundAlign tabs of the impeller cup with location holes of the impeller housing and install the impeller cup into the
impeller housing[]] 4Lightly coat the impeller cup with oil and with counterclockwise rotation, install the impeller into
the impeller cupSharp edge of cam slot is leading edge during rotation 5Apply Scotch-Grip Rubber Adhesive 1300 to outside