1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 226Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 226

101 7Lightly oil pinion splines of the driveshaftSlide the i!J driveshaft through the impeller housing and impeller until
impeller cam is displaced 9Lightly coat both sides of new impeller plate gasket with OMC Gasket Sealing CompoundPlace gasket
on the gearcase10Place the impeller plate over the gasket11 Slide the driveshaft down into the gearcase and engage the pinion
GOl 12Turn the driveshaft until holes of the impeller housing are aligned with holes of the gearcasePlace the washers on
the six impeller housing screwsApply OMC Gasket Sealing Compound to the threads ofthe screwsInstall and tighten the screws