1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 236Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 236

Assemble the tools using the long spacer, PIN 339753, to install the upper pinion bearingPress against the bearing's lettered
lip of the seal facing away from the gearcase Apply OMC Triple-Guard grease to the seal lips after installing10Coat the shift
rod a-ring with OMC Triple-Guard grease and install in shift rod bushing 1101 11.Place new washer and bushing on OMC Shift
Rod 12Oil and place the forward bearing cone and roller assembly in the forward bearing cup Bushing Installer, PIN 304515Apply
OMC Gasket Sealing Compound to the outside diameter of the shift rod bushing Using mallet, drive the bushing into the gearcase
f11l 13To install the forward gear and the shifter lever and yoke assembly, begin by threading OMC Yoke Locator, PIN 319991through
the shift rod bushing and threading it into the shifter yokeRemove the cradle from the yokeThen, while pulling on the yoke