1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 239Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 239

Installation 1On models with gearcase extension kit, make sure the driveshaft tube extension, water tube extension, and gearcase
the screw with washer to torque of 60-84 inIbs(7-9 Nm) INote When installing gearcase to gearcase extension, do not tighten
the retaining screws until the gearcase and the extension have been placed in proper position with the exhaust housing and
powerhead assembly 6Apply OMC Nut Lock to the threads of the gearcase and extension retaining screwsInstall and tighten the
screws to torque of 96-120 inIbs(11-14 Nm)7Install the propeller as follows: Apply OMC Triple-Guard grease to entire length
of the propeller shaft Install the thrust bushing onto the propeller shaft with shoulder of the bushing facing aft and fish
line trap groove facing forward Install the propellerPropeller should seat onto the thrust bushing Install the spacerengaging
the propeller shaft splines Install and tighten the propeller nut to torque of 120 inIbs(14 Nm)Continue to tighten the nutto