1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 242Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 242

COB3047 Disassembly 1Remove the six impeller housing screws and washers 2Pull up' on the driveshaft and remove the driveshaft
Pressing Screw 307639 Flat Washers Q) PIN 307638 Handle 6Remove the retaining ring using OMC Retaining Ring Pliers, PIN 331045The
retaining ring is under extreme pressure during removal and installation Wear safety glasses and proceed with care to avoid
unsnapping the ring from the pliersAfter the retaining ring is removed far enough from the gearcase to clear the housing,
release the pliers while retaining ring is still around the propeller shaft7Remove the retainer plate from gearcase Screws,