1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 245Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 245

20Remove and discard the propeller shaft bearing housing O-ring Inspect bearings in placeIf bearing is removed for any reason,
Ultra-HPF gearcase lube to prevent rusting3Perform the following inspectionsCD Gearcase housingall gasket surfaces must be
free of gasket materialAll threaded holes must be free of corrosion and sealer Gearcase anodeif anode has been reduced to
twothirds of its original size, it must be replacedRefer to Section for testing procedure Driveshaftcheck splines for chips,
wear, and cracksBearing and gear surfaces must not show signs of metal transfer, corrosion, or discolorationSevere spline
wear might indicate an exhaust housing or gearcase has been distorted by impact damage Water intake screenmust be clearIf
screen can't be cleaned, it must be replaced All internal componentsmust be visually inspected for signs of wear, distortion,