1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 246Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 246

Assembly Make no dry assembliesLubricate bearings, shafts, and gears with OMC Utra-HPF gearcase lube 24 1Oil and install
casing of the seals before installingInstall the inner seal with lip facing into the bearing housing and install the outer
seal with lip facing away from the bearing housingApply OMC Triple-Guard grease to the seal lips after installing 4Lightly
apply OMC Triple-Guard grease to new bearing housing a-ringPlace the a-ring in groove of the bearing housing 1281 5Oil and
install the forward bearing cup into the gearcaseUse OMCDrive Handle, PIN 311880, and OMCBearing Cup Installer, PIN 319929Support
nose of gearcase on the floor and seat the cup firmly in the gearcase6Coat the shift rod a-ring with OMC Triple-Guard grease
and install in shift rod bushing 1291 7Apply of the Gasket Sealing the bushing to the outside OMC Compound diameter bushingInstall