1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 247Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 247

1301 8Install the pinion bearings using the following components of OMC Universal Pinion Bearing Remover and Installer PIN
bearing Q) in the El bearing sleeve using OMC Bearing Installer PIN 322923Press against the lettered side of the bearing
until the tool is seated on the bearing sleeveUsing the same tool attached to OMC Plate PIN 318122, press the bearing sleeve
assembly into the gearcase until the plate contacts the gearcasePress against the lettered side of the bearing when installing
it into the gearcase13311341 10Install new seals back to back in the driveshaft bore using OMC Seal Installer, PIN 326552Apply
OMC Gasket Sealing Compound to the metal casing of the seals before installingInstall the inner seal with flush lip facing