1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 250Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 250

COA3238 COA3239 COA3240 27Slide the retainer plate down the propeller shaft and into the gearcase with tab facing down28Using
housing with OMC Needle Bearing Assembly Grease31Lightly apply OMC Gasket Sealing Compound to the aft support flange of the
bearing housingAlign the propeller shaft bearing housing on the guide pin with the word "UP" toward the top32Using brass
punch and mallet, seat the bearing housing in the gearcase 33Place new O-rings on the bearing housing retaining screwsApply
OMC Gasket Sealing Compound to the O-rings and threads of the screws34Install one screw in the bearing housingRemove the
guide pin and install the second screwTighten the screws to torque of 60-84 inIbs(7-9 Nm)35Coat the lower driveshaft splines