1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 252Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 252

3Coat the driveshaft splines with OMC Moly LubeDo not coat top surface of the driveshaft as the lubricant here may prevent
been placed in proper position with the exhaust housing and powerhead assembly 1601 7Slide the upper connector half onto
the upper shift rod and install the plastic keeper rs1l 8Move the shift lever until the upper shift rod engages the lower
shift rod connectorWhile holding the lower shift rod connector, tighten the upper shift rod connector securely 1621 9Install
the port and starboard water intake screens with water intake holes facing rear of gearcaseTighten the two screen retaining
screws securely163 110Install the propeller as follows: Apply OMC Triple-Guard grease to entire length of the propeller shaft
Install the large thrust bushing onto the propeller shaft with fish line groove facing gearcase Install the propellerPropeller
should seat onto the thrust bushing Install the spacerengaging the propeller shaft splines Install the propeller nut CD to