1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 260Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 260

COA6226 Assembly Make no dry assembliesLubricate bearings, shafts, and gears with OMC Ultra-HPF gearcase lube1Coat the shift
to the metal casing of the seals before installingInstall the inner seal with lip facing toward the gearcase and the outer
seal with lip facing away from the gearcaseApply OMC Triple-Guard grease to the seal lips after installing 12514Install two
new upper driveshaft seals back to back in the 12615Oil, then install new pinion bearing in the gearcase using OMC Pinion
Bearing Installer, PIN 326565Press against the lettered side of the bearing until the tool is seated on the gearcase 127112816Install
new seals back to back in the gearcase head using OMC Seal Installer, PIN 326691Apply OMC Gasket Sealing Compound to the
metal casing of the seals before installingInstall the inner seal with lip facing in the gearcase head and the outer seal