1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 262Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 262

1351 1361 14Place bead of OMC Adhesive on the upper gearcase in the location shown 15Position the propeller shaft assembly
groove of the lower gearcaseCut the ends of the seal to fit exactly in the grooveApply RTV adhesive to the ends of the seal
for length of V2 in(12 mm) 19Position the lower gearcase on the upper gearcaseApply OMC Gasket Sealing Compound to the threads
of the gearcase retaining screwsInstall the two front and two rear screws, then loosely tighten the screws evenly to draw
the gearcases togetherPush rearward on the lower gearcase with steady pressure as the retaining screws are tightenedInstall
the remaining screws and gradually tighten them, alternating from side to side and working toward the rearTighten the screws
to torque of 60-80 inIbs(7-9 Nm)Remove the alignment tool 20Apply OMC Tripe-Guard grease to new pivot pin a-ringInstall the