1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 264Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 264

Installation 1Coat the driveshaft splines with OMC Moly Lube greaseDo not coat top surface of the driveshaft as lubricant
Compound to threads of the gearcase and extension retaining screwsInstall and tighten the screws to torque of 192-216 inIbs(22-25
Nm)Apply OMC Loequie Primer then OMC Nut Loekto threads of the gearcase and extension studInstall the nut and tighten to
torque of 45-50 ftIbs(61-68 Nm)When installing gearcase onto gearcase extension, do not tighten the retaining screws until
the gearcase and the extension have been placed in proper position with the exhaust housing and powerhead assembly!I 1431'"l
hole in the groove in theInstall the screw with washer 6Align lower shift rod with the screw il the connectorand tighten
to torque of 120-144 inIbs(14-16 Nm)7Apply OMC Adhesive Mto new exhaust housing cover plate gasketInstall the gasket and
the cover plate 1441 8Install the propeller as follows: Apply OMC Triple-Guard grease to entire length of the propeller shaft