1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 269Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 269

Bearing Housing Servicing 1Remove water pump assembly from bearing housing2Separate jet housing from bearing housing and
until it is warm to the touch 7Place bearing housing assembly in pressPress from the impeller end ofthe driveshaft until
the seal carrier is free from the housingContinue to press bearings and driveshaft from bearing housing 8To replace the bearing
housing seal, remove inner seal retaining ring with knife blade or thin-blade screwdriverLift tang of retaining ring, and
raise retaining ring in circular motion until it has been removed [[] 9Using punch, drive out the inner seal and discard10Remove