1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 283Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 283

Starter Servicing9.915 Removal i and remove all spark plug leads '" 1Avoid accidental starting of engine while servicing;
in the ropePry the starter rope anchor out of the handleRemove the handle, release the slipknot, and let pulley slowly wind
up rope until the rewind spring is completely unwound1sl 4Remove the retaining ring, and lift the pawl and links as an assembly
to prevent starter spring from coming loose i the spindle screw, nut and spindleHold pulley in place 6Hold the pulley in
the starter housing while turning the 5Hold the spindle nut under the housing, and remove ill starter over, right side upHold
fingers clear of the pulley, and jar the starter housing against bench to dislodge the rewind spring and pulley Safety Related