1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 284Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 284

Cleaning and Inspection 1Wash metal components in solvent and dry with compressed air2Inspect the rewind spring for cracked
while disassembling and assembling manual starters because of rewind spring tension 1Place shield into starter housingLubricate
starter housing, shield, spring, and pulley bearing surfaces with OMC TripJeGuard greasef91 2Insert spring through starter
housingHook spring end l!J into pulley hub slot as pulley is placed in position in the starter housingr,()l 3Hold pulley
in place and turn pulley slightly to check that spring is hooked to pulleySecure pulley with screw, lubricated spindle, and
locknutTorque locknut to 120-140 inIbs(14-16 Nm) r,v 4With starter upside down, carefully turn pulley counter- clockwise