1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 285Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 285

1121 5Let spring slowly unwind, turning pulley V2 to 1V2 revolu - tions until rope anchor is opposite rope guide Insert Phillips
spring slowly wind rope onto pulleyReinstall starter pawl components as an assemblyInstall E-ring with sharp edge up 9Check
the operation of the pawlThe pawl shou Id extend when the starter rope is pulled and retract when the starter rope rewinds
1161 10Reinstall into Reinstall plunger, spring, tappet, and cam With retaining pin Installation 1171 11Position starter
on motorConnect starter lockout link to camTurn cam screw IN carefully until screw head contacts camDo not overtighten '1sl