1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 290Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 290

Installation 1Inspect the starter mountIf the mounts are damaged or worn, replace as follows: OJ Remove the mount using crescent
mounts4Position the starter assembly onto the motorInstall the three starter housing retaining screwsThe short screw CD is
installed on the port side of the starter housingTighten screws to torque of 48-72 inIbs(5,4-8 Nm) 3Install the starter lockout