1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 304Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 304

Starter System Voltage Drop Test By making systematic check of the starter system, any component or electrical connection
terminalTurn key switch to START to crank engineVoltage reading should not exceed 0.3 voltIn Step 2, connect the voltmeter
leads only while the engine is crankingor damage to the voltmeter can occur2Connect voltmeter negative lead to the starter
side of the starter solenoid terminalWhile cranking engine, connect voltmeter positive lead to starter solenoid opposite
terminalVoltage reading should not exceed 0.2 voltRemove voltmeter positive lead from starter solenoid and stop cranking