1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 307Get this manual
High Voltage In some conditions, the key switch may be shorting (some leakage) to the other terminals in the key switch,
leakage test of the test to the "8" terminal and apply 2Repeat test by moving the red lead to each of the terminals and applying
the leakage testThe meter will indicate if leakage is present3When applying test to other "M" terminal, turn key to the "ON"
position Start Switch Ohmmeter CheckTE Disconnect the two switch leads from the starter solenoidCalibrate ohmmeter on appropriate
scaleConnect one meter lead to switch yellowred lead, the other meter lead to switch red leadDepress switchMeter should show: