1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 308Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 308

Solenoid Check INotel All engine wiring must be disconnected from the solenoid before proceeding with this test 1Calibrate
+" connection, with OMC Black Neoprene Dip No Load Current Draw, Electric Starter 1Note Securely fasten starter in vise or
other suitable fixture before proceeding with this check1Locate battery rated at 350 cold cranking amps or higher that is
in good condition and fully charged, to perform this test2Connect 0-50 amp ammeter in series with heavy jumper between the
battery 1+" terminal and the starter 1+" terminal3Attach or hold vibration tachometer, such as Frahm Reed tachometer, to
the starter while performing the test4Complete the circuit with heavy jumper between the battery 1_" terminal and the starter