1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 310Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 310

Assembly 1Lubricate the armature shaft bearing surface with one drop of SAE No10 oilLubricate the armature shaft on and above
ill thru-boltsTighten the thru-bolts to torque of 30-40 inIbs 6Put drop of oil on the two thru-bolts and install the (3,4-4,6
Nm)Apply OMC Black Neoprene Dip to the seams between the end caps and frame and magnet assembly 101 7Assemble the pinion,
spring, spacer, and nut to the armaNm) l!J ture shaftTighten the nutto torque of 150-170 in lbs(17-19 8Refer to No Load Current
Draw, Electric Starter to check starter operationInstallation 19l 1Install the starter on the bypass coverThe electric starter
motor must be held firmly against the bracket while bolting it to the bypass coverTighten screws to torque of 10-12 ftIbs(14-16
Nm)19l 2Install the starter lead to the starterTighten the nut securelyApply OMC Black Neoprene Dip to connectionThen, tightening