1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 313Get this manual

1995 Johnson Evinrude "EO" 9.9 thru 30, 2-Cylinder Service Manual, P/N 503146, Page 313

DR5446 30716 4Assemble armature to frame and magnet assembly, aligning marks on drive cap end and frame 5Install insulated
putty knife Screws secure ground brush leads and holderInsert insulated brushes in holder 8Put drop of oil on thru-bolts
before assembling starter motorInstall thru-boltsTorque thru-bolts to 95-100 inIbs(11-12 Nm)Seal with OMC Black Neoprene
Dip9Install pinion base and pinion on armature shaft10Install spacer and spring on armature shaft 11Install cup on armature
shaftPress cup down on spring and install retaining ring in groove on armature shaft I Note Pull cup up over retaining ring