1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 46Get this manual

1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 46

Electrical Cable Installation ill electrical tDisconnect battery cables from battery before servicing systemsFailure to
power- 1sl 7Manual Tilt ModelsInstall battery cables, electrical cable and VRO Low Oil Warning wire in grommet Install clamp
and secure with two screws1sl 8TrimTilt ModelsBundle the electrical cable, the trimtilt cable, battery cables and the VRO
Low Oil Warning wire, and wrap the cables using the piece of rubber wrap supplied with the battery cables Install tie strap
around rubber wrap Twist tie strap around so the connection is facing down to fit in lower engine cover Tighten and cut tie
strap Place rubber wrap in opening in front of lower engine coverInstall clamp and secure with two screws ill all cables
to avoid binding or chafing through all engine steering and tilting angles '" After installation, verify that there is sufficient