1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 50Get this manual

1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 50

Heli-Coillnserts and Installers these Heli-Coil inserts on all models to repair damaged threadsThe installation kit consists
Heli-Coillnserts, V2-13 Heli-Coillnserts, 34 -16 Heli-Coillnserts, 14 mm (3fa inReach) Heli-Coillnserts, 14 mm (112 inReach)
PCE0027 Installation Instructions 1Drill to adequate depth using drill size supplied with kit2Use Heli-Coil tap supplied
with packCheck thread size on shank to make certain proper size is used3Screw insert onto mandrel until tang is fully engaged
in driving contour4Screw insert into tapped holeTop of insert must be onequarter to one-half turn below top surface5The tang
must be removed to allow full passage of screw into the insertThe tang may be broken off cleanly atthe notch in the bottom
coil with punch or rod having diameter that just fits into the assembled insertMake sure that the punch or rod has square