1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 107Get this manual

1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 107

Power Pack Removal 1Separate the power pack connector(s)Twist and remove the primary lead covers from the ignition coils2Notice
pack ground lead where indicated and install the retaining screwsTighten the screws to torque of 60-84 inIbs(7-9 Nm)4Apply
isopropyl alcohol to the Amphenol connectorsAlign flat areas and carefully plug togetherSecure with wire retainer where used5Lightly
coat the openings of the primary lead covers and install them on ignition coil terminalsObserve proper wire routing and ignition