1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 140Get this manual

1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 140

22 COB1364 Lift crankshaft and crankcase heads from cylinder block and place on bench for disassembly 1231 15Replace the
with malletDO NOT reuse sealIf bearing is damaged, crankcase head and bearing assembly must be replaced they were before
you removed themInstall the screws finger tight 1251 17Remove the upper crankcase head from the crankshaft 12627 18 Remove
four screws (lower crankcase head to lower bearing retainer plate) and remove lower crankcase head from crankshaftRemove
seal by driving out with punch and mallet, then discard sealRemove and discard the 0-rings Discard the four lower crankcase
head screwsAlways use new screws when installing the crankcase headRemove O-ring from crankshaft sleeve and inspectReplace