1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 151Get this manual

1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 151

45Thoroughly clean and degrease the crankcase mating flange of the cylinder block with OMC Cleaning Solvent and let air dry46Apply
ftIbs(24-27 Nm)Begin with the center screws and work outward in a spiral pattern 52Temporarily install the flywheel and key
to rotate crankshaft and check for bindingIf binding occurs, tap bottom of crankshaft with rawhide mallet and recheck53Install
the crankcase flange screws and torque to 60-84 inIbs(7-9 Nm) 13711381 54Apply OMC Locquic Primer and OMC Nut Lock to the
upper and lower crankcase head screws and install themTighten the screws to torque of 120-145 inIbs(13,5-16 Nm) 1391 55Apply
OMC Gasket Sealing Compound to outside diameter of the temperature sendersSeat the senders in the cylinder heads56Apply OMC
Gasket Sealing Compound to two new cylinder head cover gasketsInstall the cylinder head coversStarting with the center screws,
tighten to torque of 60-84 inIbs(7-9 Nm) 57Apply OMC Gasket Sealing Compound to two new exhaust cover gasketsPlace the inner