1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 186Get this manual

1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 186

1201 7Put tie straps on braided tube ends and attach stop switch assembly to outer handlef21l 8Install the idle adjustment
the stop button leads and throttle cable through the lower engine cover grommet2Apply OMC Triple-Guard grease to the two
steering handle bushingsPlace the bushings into the steering bracketAttach the steering handle to the bracket 20 The steering
handle nut must have nylon patch for lockingReplace the nut it if has lost is locking featureTighten the nut so the steering
handle can be pivoted and maintain any position3Secu re the stop button lead to the powerhead 4Using OMC Pin Insert Tool,
PIN 322697, and isopropyl alcohol, insert the wire into 1-pin Amphenol connector 5Thread the throttle cable bracket, jam
nut, and pivot connector on the throttle cable6Refer to Synchronization and Linkage Adjustments, Section 1, to adjust the