1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 192Get this manual

1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 192

Propeller InstallationV6 These instructions apply when spacer is brassIf spacer is made of nylon, replace with brass spacer,
shaft by aligning splines and pushing until it seats on the thrust bushing [!] 6Install the spacerengaging the propeller
shaft splines7Wedge block of wood between propeller blade and the anti-ventilation plate 8Install the propeller nut 70-80
ftIbs(95-105 Nm) and tighten to torque of 9Position keeper on propeller nut with one space between tabs aligned with cotter
pin hole in propeller If keeper will not align with cotter pin hole, tighten propeller nut to achieve alignmentDo not loosen