1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 209Get this manual

1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 209

LL: :""OB=7S=81:-' C The clutch dog is not symmetricalIf installed backward, it will not fully engage forward gear and will
assembly into the gearcase, being sure to align the shift housing pin with hole in forward end of gearcase housing Triple-Guard
greaseInstall the -rings into the shift rod coverPlace the shift rod grommet and shift rod spacer (TX models) on the shift
rodGrease the threaded end of the shift rod and insert it through the coverTurn the shift rod while pushing it through the
cover to avoid damaging the a-rings r:J4l11sI 17Lubricate two new shift rod cover a-rings with OMC G6l 18Apply OMC Gasket
Sealing Compound to both sides of a new shift rod cover gasket Position the gasket on the gearcaseThread the shift rod into
the detent lever about four turns 19Move shift rod from side-to-side while pushing on the propeller shaft to ensure proper
alignment of the bearing housing locator pin into the locator pin hole in the gearcaseTap the end of the propeller shaft
with plastic or rawhide mallet to fully seat the bearing housing '17l 20Apply OMC Gasket Sealing Compound to the threads