1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 219Get this manual

1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 219

f81 13To assemble inner and outer seals to bearing housing, install outer seal retaining ring into its groove in the bearing
the seal is seated, install the inner retaining ring 1101 f'11l 15Install inner seal with lip facing outwardTap seal into
r:w2l 16Remove the seal carrier assembly and thrust washer from the driveshaft 17Remove the retaining ring with retaining
ring pliersWear safety glasses and proceed with care to avoid unsnapping the ring from the pliers 18Inspect driveshaft bearings
in placeIfthe bearings are removed for any reason, they must be discardedTo remove, press bearings off driveshaft from impeller