1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 226Get this manual

1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 226

Assemble remaining shims, new tab-lock washer, and impeller nut onto driveshaftTorque impeller nut to 16-18 ftIbs(22-24 Nm)Use
control handle to NEUTRAL detent 1ol 2Hold reverse gate up and check for proper clearance l!J between reverse gate and water
flow passage: in(11,9 mm) 3If adjustment is required: Loosen cam screw Rotate cam eccentric nut while holding reverse gate
up, until proper clearance is achievedTighten cam screw and recheck adjustment4Move remote control handle to FORWARD detent
t=.J pressure to move the reverse gate up, toward NEUTRALIf When the roller is in FORWARD position apply hand properly adjusted,