1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 227Get this manual

1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 227

Shift Cable AdjustmentRemote Control Models i from forward boat travel could move the gate into RE- '" The shift cable must
NEUTRALThe cam roller should snap into NEUTRAL detent when you pull up on the reverse gate with moderate pressure 6If you
cannot achieve NEUTRAL detent, lengthen cable slightly and recheck your adjustmentIt is very important that the reverse gate
must remain locked in the FORWARD detent range when remote control is in FORWARDWhen properly adjusted, the reverse gate
cannot be pulled out of the FORWARD detent range by hand7Tighten locknut and loosen Va to 14 turn to permit free movement
of camr:Jil 8Loosely secure shift cable to the steering cable with tie strapDO NOT restrict movement of the shift cable Important