1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 228Get this manual

1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 228

Shift Rod AdjustmentTiller Models i from forward boat travel could move the gate into RE- The shift cable must be adjusted
gate with moderate pressure 5If you cannot achieve NEUTRAL detent, remove connector pin then rotate connector to lengthen
shift rod slightlyRecheck your adjustmentIt is very important that the reverse gate must remain locked in the FORWARD detent
range when shift handle is in FORWARDWhen properly adjusted, the reverse gate cannot be pulled out of the FORWARD detent
range by handTighten nut Important CD firmly against connector fN=J With engine running in NEUTRAL and twist grip in START
position or higher, engine will run rough due to exhaust restriction from the reverse gate being in NEUTRAL Safety Related