1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 244Get this manual

1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 244

Solenoid Check I Note All engine wiring must be disconnected from the solenoid before proceeding with this test 1Calibrate
with OMC Black Neoprene Dip No Load Current Draw, Electric Starter INotel Securely fasten starter in vise or other suitable
fixture before proceeding with this check1Locate battery rated at 350 CCA (70 amphrs or higher that is in good condition
and fully charged, to perform this test ern 2Connect athe battery "+" terminal seriesthe starterheavy 0-50 amp ammeter in
with jumper between and "+" terminal3Attach or hold vibration tachometer, such as Frahm Reed tachometer, to the starter while
performing the test 4Complete the circuit with heavy jumper between the battery "-" terminal and the starter frame 5Monitor