1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 260Get this manual

1995 Johnson Evinrude "EO" 90 CV 85 thru 115 Service Manual, P/N 503150, Page 260

General Safety Warnings Before working on any part of the power trimtilt system, read the section called Safety at the end
manifold or cylinder bodyHeat can cause high pressure leaks or failure of parts, or bothIf you open the manual release valve
to manually tilt the motor up, be aware that the motor cannot be held up by merely closing the valveThe motor must be held
up by the tilt support, the trailering bracket, or suitable hoistThe motor must be lowered manually, or with hoist, until
it is resting on the trim cylindersBefore returning the motor to your customer: Make sure the manual release valve is tightened
(turn clockwise) to reactivate the motor's shock absorption protection, reverse thrust capability, and all the trimtilt functions
Make sure the trim limiter rod is installed and in the same location as it was when the motor was brought in for serviceLeaving